Penguin Tank

ENQUIRY NOW

Month: January 2018

Categories
Plastic Water Storage Tank

Know the Meaning of Rotational Moulding of Polyethylene Water Tanks. How is it done?

Know the Meaning of Rotational Moulding of Polyethylene Water Tanks. How is it done?

Blog

Know the Meaning of Rotational Moulding of Polyethylene Water Tanks. How is it done?

  • May 7, 2021
  • Posted by: ptbloguser
  • Category: Plastic Water Storage Tank
  • No Comments
Know the Meaning of Rotational Moulding of Polyethylene Water Tanks. How is it done?

Nowadays, polyethylene water storage tanks are trending. Due to its popularity and availability, most manufacturers are focussing on the manufacture of this type. The main elements used to manufacture polyethylene water tanks are water tank molds, polyethylene powder and gas fired ovens. It was discovered many years ago but reached its potential only after the commercialization of its production.

The basic raw material used to roto mold water tanks is Linear Low-Density Polyethylene(LLDPE). LLDPE has a high degree of short and long chain branching which gives molten LDPE its desirable flow properties. It is most suitable for manufacturing of water tanks. This process is known as free radical polymerization.

Rotomolding is one of the most popular plastic molding techniques. In this process, a measured quantity of powdered polyethylene resin is placed into the mold of the tank. The powder is then compounded and mixed to include the desired color. Additionally, UV stabilizer is added to make sure that the color does not fade away when exposed to sun rays and a release agent to remove the tank from the mold is also included. The oven needs to be preheated before the mold is placed there. After placing it in the oven, the mold is rotated bi-axially in order to coat the inside of the mold evenly. Be careful with the time spent in the oven. The tank should neither be overcooked or undercooked. Both the situation will lead to defects and imperfections in the tank. The entire manufacturing process is computer controlled. After removing the mold from the oven, it has to be cooled properly. The cooling process allows the polyethylene to set and to shrink slightly in order to remove the tank from the mold. This is the most critical step in ensuring a perfect tank. After the mold has cooled enough, remove the tank. And you are ready to repeat the process to make another one.

Most tank manufacturers try to make as many water tanks as possible without changing the mold. Changing the mold every time will add a lot to the cost of production. This is the newest technology in the manufacture of polyethylene water tanks. This makes the tank stronger, durable and completely safe for human consumption. Water stored in these LLDPE water tanks can be used for different household and commercial purposes without a worry.

Leave a Reply

Categories
Water StorageTank

Why Would a Water Storage Tank Need to be Removed?

Why Would a Water Storage Tank Need to be Removed?

Blog

Why Would a Water Storage Tank Need to be Removed?

  • May 7, 2021
  • Posted by: ptbloguser
  • Category: Plastic Water Storage Tank
  • No Comments
Why Would a Water Storage Tank Need to be Removed?

Water storage tanks are ubiquitous and we all use these for various domestic or commercial purposes. An expert’s hand is required for its proper installation. Water storage tanks need a proper care in order to run efficiently just like other home appliances. A regular cleaning and other basic necessities are a must to keep the tank in working condition smoothly for a longer period of time. However, there are times when we need to remove the storage tank for various reasons. Just like installation, removal also requires the help of experts. It can’t be done on our own. Penguin Tank, a renowned water tank manufacturer provides all the solution related to installation as well as removal of a water tank.

Some of the most common reasons for removal of a storage tank includes the following:

1. Transfer of ownership

This is a possibility, mostly, in cases of commercial use of a tank. It is quite possible that an industrial facility, gas station or any other commercial property is being sold to a new owner or a group of the body. In this case, the tank might have to be removed according to some local rules and regulations before the actual sale takes place.

2. Replacement of the Tank

Water storage tanks technology is evolving constantly just like others. It a technological world and no technology remains the same. It keeps getting upgraded with extra features to newer models. Therefore, it is quite obvious that a facility owner would want to upgrade to the newer model. The old tank has to be the first removed carefully in order to install a new one. A trusted expert is required for this job.

3. Defective Tank

When a tank is leaking or getting damaged for any reason, it is important to remove it properly to avoid soil contamination. According to EPS standards, when the soil is contaminated it becomes costly to clean the tank. Therefore, it makes sense to remove it as quickly as possible because it becomes difficult to repair one in this condition.

4. Facility Closure

As per the local rules and regulations, it might become necessary to remove the tank if the facility closes for any reason.

If any of the above situation arises, contact the expert and get your tank removed as soon as possible. Well, this situation does not arise often and are uncommon, but there is always a possibility of rare happenings. Good Luck!

See more : What To Consider Before Purchasing A Water Tank?

Leave a Reply

Categories
Plastic Water Storage Tank

Watch Out! Your Plastic Water Tank is Overflowing.

Watch Out! Your Plastic Water Tank is Overflowing.

Blog

Watch Out! Your Plastic Water Tank is Overflowing.

  • May 7, 2021
  • Posted by: ptbloguser
  • Category: Plastic Water Storage Tank
  • No Comments
Watch Out! Your Plastic Water Tank is Overflowing.

Plastic water tanks rank the best out of all on the basis of a number of advantages that it holds over the others. While using a ploy tank, our main concern remains when the tank fills up with water and overflows. After all, where does all the water go? We often come across that many poly tanks on houses with one or two downpipes going inside the tank but nothing coming out. This makes the water overflow to the sides of the tank and on to the ground. Sometimes an overflow kit is installed on the sides of the tank without any pipework. Pipework is required to divert the waste away from the tank. This is not a preferable situation for a poly tank. This can cause erosion around the base of the tank.

What is the solution? Let us get to know how can we prevent our plastic water tank from overflowing and checking erosion. The solution lies in plumbing the overflow away from the tank. This is most important when there is dust or sand at the base of your tank. There is always a 90 mm overflow fitting in most plastic water tanks to plumb off with standard 90 mm stormwater pipe. It can be installed anywhere around the tank and can be easily fitted through slight curves and in the walls of the tank. It doesn’t really require a flat surface.

There are few options that where should the water go to prevent flooding.

  • In urban areas, a stormwater line is an option out to the street. The water from an overflowing tank can be directed to the stormwater line.
  • Buy another tank to store excess stormwater if there is limited space in your rainwater tank and it often overflows. This also gives you the extra benefit of additional water catchment which is very important.
  • If you reside out of town, pipe the water at least two meters away from the rainwater tank. Again it is important to divert it down the hill away from your house. Watch out where the water is flowing after coming out from the end of the pipe. It is quite obvious that you do not want to flood a garden, shed or courtyard everything your tank overflows.

By making provision for these simple but useful ways, you can stop flooding from an overflowing tank. You can also seek an expert’s guidance if needed. Penguin Tank is one such name.

Read more : How to Prevent Underground Water Storage Tank Flotation?

Leave a Reply

Categories
Plastic Water Storage Tank

Water is the Most Precious Resource. Preserve It. Do Not Waste it.

Water is the Most Precious Resource. Preserve It. Do Not Waste it.

Blog

Water is the Most Precious Resource. Preserve It. Do Not Waste it.

  • May 7, 2021
  • Posted by: ptbloguser
  • Category: Plastic Water Storage Tank
  • No Comments
Water is the Most Precious Resource. Preserve It. Do Not Waste it.

Water is essential and we cannot imagine a single day without its use. We use water every day to stay alive including multiple other uses. Pure water provides good health and keeps our body disease free. According to a research, it has been identified that the origin of water is older than the sun approximately 4.6 billion years old. Therefore, we should not waste water and conserve it. We take water supply for granted and misuse in many ways. By saving water, we also save energy used for pumping and treating the same. We celebrate March 22 as the World Water Day every year but forget that it is scarce. Lets us make a resolution in this new year that we will save water as much as we can.

Let us pick a few things to start with and try to do more with time.

  • Take shorter showers instead of a bath as the latter saves five times more water than the former.
  • Strictly turn off the tap water while brushing, shaving or washing up when not in use. Regularly check for the leakage of taps. A leaking tap can waste up 120 litres of water every day.
  • Do not flush the toiled unnecessary. Dispose of cigarettes, tissues or other waste in the dustbin rather than the toilet.
  • Store drinking water in the refrigerator so that you don’t have to open the tap everytime you want to drink cool water. The same theory applies to cooking water as well.
  • When doing the dishes, fill up the sink with soapy water to save unnecessary wastage of water running down without any use.
  • Washing machines should be fully loaded for optimum water conservation while washing clothes. Use your washing machine in an Eco-friendly way.
  • Use recycled papers instead of printed ones as it saves 20000 litres of water.
  • Make a provision to collect rainwater by installing best quality water storage tanks. Rainwater collection can be used for both domestic and commercial purposes. This practice not only saves water but also avoids an overloading of drainage systems during flooding.
  • Use less water while washing your car.
  • Water the garden economically. Make use of drain water for watering plants instead of throwing it away. Instead of watering, soak it deeply.

Water conservation should come naturally after knowing its importance. It can be taught or forced to someone. Take this step now which can make a big difference in saving our mother nature.

 

Leave a Reply