Penguin Tank

ENQUIRY NOW

Month: September 2017

Categories
Plastic Water Storage Tank

Why is it beneficial to buy new Plastic Water Storage Tank over repairing an expired one?

Why is it beneficial to buy new Plastic Water Storage Tank over repairing an expired one?

Blog

Why is it beneficial to buy new Plastic Water Storage Tank over repairing an expired one?

  • May 7, 2021
  • Posted by: ptbloguser
  • Category: Plastic Water Storage Tank
  • No Comments
Why is it beneficial to buy new Plastic Water Storage Tank over repairing an expired one?

Considering the plastic tank, they are broadly used by the Indian consumer for domestic use and for commercial use as well. They are a sort of storage containers used to store water. With greater impact strength and its superior resistance to rust, corrosion and fuel additives, it has proofed to be better than any iron or steel tanks. So, why would it be better to buy a new tank over repairing a broken tank?

Suppose, your tank is broken, may be due to rust or natural calamities or by any external body.

If it is a new tank and it has got light incisions or crack then it can be repaired with a small and cost-effective tool. But if you are trying to fix an old tank than it is hard to assume it to be a good idea. Old tanks might damage over time due to long usage. It may, not only took you several days but also a significant amount investment for repairing the tanks and you definitely won’t want it to repeat the same again and again.

So, points that will bring light to why you should buy a new plastic water storage tank over repairing an old one, are as follows:

  • Time-consuming: Needless to say anything that needs to repair will require time. And if you get to wait several hours for your number to come to use the washroom, due to the scarcity of water, what else to say.
  •  Increases Expenses: If you don’t have enough equipment at home either you have to buy them or get it done by a mechanic. Either way, it involves several expenses.
  •  No guarantee over its repair: Even after spending so much time and money in repairing your tank, it might not give you desired result or it may get damaged over again from the same or different angles and while making a continuous repair, you might actually pay the half amount of a new water tank.

So, the question arises over again, why to spend money on an old thing instead with a little more addition of money you can get a whole new Plastic Water Storage Tank which comes with 5 to 10 years guarantee to give you many worry-less years.

Leave a Reply

Categories
Plastic Water Storage Tank

The Process Of Roto-molding Water Tanks In Detail

The Process Of Roto-molding Water Tanks In Detail

Blog

The Process Of Roto-molding Water Tanks In Detail

  • May 7, 2021
  • Posted by: ptbloguser
  • Category: Plastic Water Storage Tank
  • No Comments
The Process Of Roto-molding Water Tanks In Detail

The manufacturing process of water tanks determines several factors about the longevity and state of water stored inside. The roto molding technique is a superior molding technology that makes seamless products in a mass production at a comparatively low price.

Traditionally, other molding techniques were traditionally used by most of the manufacturers, though nowadays, few leading water tank manufacturers in India are employing the roto-molding technique for producing plastic water storage tanks. We will discuss the roto-molding technique in details now.

A roto molding water tank offers a wide range of benefits over the conventional ones. The roto-molding is a highly versatile and the best possible manufacturing technique to produce partially or totally hollow structures.

Let’s understand in details, how the roto-molding technique is carried out in detail –

  •  The resin of powder polymer is measured as per the desired thickness and poured into the mold
  •  The apparatus is then subjected to heat in order to melt the contents
  • Simultaneously is rotated in either one two, or all three axes, depending upon the particular requirement
  • The molten polymer is then evenly spread on the inner surface of the mold. The centrifugal force generated through the rotational momentum, ensure that the thin paper stays and sticks on the inner surface itself.
  •  The mold is cooled with fans and the polymer inside is solidifies in a hollow cylindrical structure.
  •  On complete solidification, the mold is opened and the tank is extracted.

Various colored tanks are processed by using the colored polymer as the raw material. Thus, the tanks never lose the color and stay newer for a longer period of time. The feature of the threads on the topmost portion for the threaded lids is also added through the presence of threads on the mold itself.

The roto molding technique is exceptionally helpful to make multi-layered tanks. After the outermost layer is molded and solidifies, each of the immediate inner layers is added from inside.

A roto molding water tank is manufactured in one piece, with smooth edges and curves. The absence of any sharp joint, or bend ensures that the resultant product has more longevity and shelf life.

All but one (the loft tank) models of water tanks of Penguin tank are manufactured with the roto-molding process. It is superior to other water tanks in the market, which are either assembled or manufactured by traditional molding technology.

Leave a Reply

Categories
Plastic Water Storage Tank

Does The Water Remain Safe In plastic water storage tank?

Does The Water Remain Safe In plastic water storage tank?

Blog

Does The Water Remain Safe In plastic water storage tank?

  • May 7, 2021
  • Posted by: ptbloguser
  • Category: Plastic Water Storage Tank
  • No Comments
Does The Water Remain Safe In plastic water storage tank?

The water, like any other fluid, does not have any particular shape and it takes the shape of the container. But during the same, it also acquires several other qualities of the plastic container as well. The same holds true for water as well. The safety of stored water in a plastic water storage tank is a matter of discussion.

Though the quality of water stored in a steel water tank is also a matter of debate. The corrosion of the internal layer can contaminate the water as well.

If the water is being supplied by the municipality, it is often safe to assume that the quality. So, if it is being treated or filtered before supplying, it is well and good. If it is not, for example in case of rainwater harvesting, very little can be done to purify it inside the tank.

It is important to understand that a water storage tank is not a water purifier. It cannot purify and make water portable. The best water storage tank can do is to ensure that it does not facilitate the algae formation and germ buildup.

The use of poor quality plastic may influence the chemical composition of water up to a large extent. It might even go unnoticed for a short period of time, but after a time being, it will start to project a peculiar ‘plastic’ taste in the stored water. Which is why it is recommended to go for a tank that has been made with food grade material.

Also, the shape of the tank plays a vital role in the same. The round cross-section of a cylindrical tank ensures that the water receives maximum circulation, upon opening of any of the water channel or tap. This facilitates the water circulation and thereby prohibits the growth of algae or any other pathogen inside.

Special features like ultraviolet guard is an additional per, that goes a step further than usual and ensure that the water does not get affected due to the long hours of exposure to the ultraviolet component of the sunlight.

The plastic water storage tanks offered by the house of penguin are made up of food grade material, which ensures the purity of water. Also, it is manufactured with multiple layers, each with a distinct advantage to ensure the good quality of water stored. The roto-molding manufacturing process ensures a uniform cross section and even thickness of each layer. It is a quality product designed, manufactured and offered to enable you to have aces to clean, fresh healthy water every hour of the day.

Leave a Reply

Categories
Plastic Water Storage Tank

Review 2 Layer Water Tank

Review 2 Layer Water Tank

Blog

Review 2 Layer Water Tank

  • May 7, 2021
  • Posted by: ptbloguser
  • Category: Plastic Water Storage Tank
  • No Comments
Review 2 Layer Water Tank

Despite the attempts to smoothen down the gap of socio-economical strata in India, a huge population of India belongs to the lower middle class. For their personal use they need to get a water tank for their family but within a limited budget. Several water tank manufacturers in West Bengal provides plastic water storage tank for such people.However, while trying to extract profit out of it, they deliver poor quality water tanks to them, which looks in shape at the point of sale, but afterward, it degrades pretty quickly and ultimately causes harm to the users. To address this issue, the house of Penguin tank has, water tank manufacturer in West Bengal a basic plastic water tank out of the best quality material, namely the 2 layer water tank.

Obviously one can find water storage tanks with much better features as well, but today, we are focusing on the best quality basic water storage tank made out of plastic. The two-layer tank, as the name clearly indicates, contains two layers overlapping in the cross-section.

The inner layer is made up of plastic of food grade standard. As the water stays in contact with the innermost layer of any tank, the superior quality of plastic makes the water free of any harmful chemical or pathogen. The outer layer is made up of the ultraviolet blocking material, and as the name suggests, it blocks the harmful effects of ultraviolet rays to penetrate and influence the properties of the stored water.

The tank is made through the roto-molding process, which ensures a newly uniform cross-section of every layer and also the continuity of both layers in the tank.

Even with a limited budget, Indians and few options to make the best out of their money, which is absolutely true for Penguin tank as one can get multiple options for the model in both color and size. One can pick from traditional black, parrot green and Sudan blue as the color of their water tank.
Also, one can pick the tank from a set of various capacity. It depends on one’s usage, availability of water and the number of habitats sharing the same.

The house of Penguin tank offers a wide range of products and the two-layered tank is simply the basic model. One can check out the Maxx foam tank, or four layer water tanks as well. Each of the tanks has its own features, making it ideal for domestic and commercial use.

Leave a Reply