Penguin Tank

Categories
Plastic Water Storage Tank

Loft Tanks: Installation and Use

Blog

Loft Tanks: Installation and Use

Loft Tanks: Installation and Use

Loft water tanks are widely used for the domestic and commercial purpose. These are designed mainly for indoor use in case of an emergency. High quality plastic loft water tanks are mainly installed in the kitchen or bedroom above the loft. They come in many sizes ranging from 100 liters to 1000 liters. They are mostly available in black, white or transparent color. These unique and rectangular shaped tanks are designed in order to keep the space where it is to be placed.

Penguin Tank is the best quality water tank manufacturer in West Bengal who manufactures high-quality loft tanks for the kitchen, domestic and general uses. Its main features include safe drinking water, quality tested and verified, best quality plastic is used, rust and corrosion free and lightweight. The modern design makes it excellent to be used in today’s world and it’s completely leaking free. They are manufactured as per the consumer’s demand and checked by the experts for the quality and durability before it is made available to the customers. At the same time, they are economical in comparison to other manufacturers. They have a good lifespan and are highly dependable.

A permission has to be taken before installing such tank as it is illegal to install the same without a permission from Municipal authorities. A permission is also required to make sure that the building or the flat or the house where the installation will take place is stable and strong enough to take the load of the tank and the limitation of the quantity of water that has to be used. Please make note that the permission is easily available for a fee and there is a process to apply for the same which can be checked on Municipal Corporation’s website. Certain points that have to be kept in mind before installing this type of tank are as follows:

  • Wooden platforms should not be used as they are uneven and hence not good enough to take the weight of the tank properly.

  • Avoid corrugated iron decking at the base.

  • Enough space should be kept in between the roof and the tank if installing indoors for the cleaning of the tank regularly.

  • Avoid hot rods or pipes and use a hole saw to for the drilling of inlet and outlet holes.

  • All pipework must be done properly to avoid any strain on the tank.

Leave a Reply

Categories
Plastic Water Storage Tank

A Glimpse At The Layered Water Tanks

Blog

A Glimpse At The Layered Water Tanks

A Glimpse At The Layered Water Tanks

Plastic Water Tanks are marked safe for different uses. They are highly durable and rust and corrosion free. They provide a better quality of water which means better health for you and your family. Of late plastic, tanks have taken over the others and are the most preferred type of Water Tank in India at present. Plastic water tanks are classified on the basis of different layers, manufactured as per the consumers’ need and requirement. We have observed different colored and types of water tanks and its importance. But what exactly is a layered water tank? What are its importance and uses? How does it differentiate from each other? Let us look at the answers below.

Single Layered Plastic Water Tanks:

These water tanks have a single layer of plastic. Therefore they are not UV stabilized and do not protect the water tanks from the harsh ultraviolet rays of sunlight. Continous exposure in the sun leads to bacteria growth called algae in water tanks which are extremely harmful to the human use. These are considered as lower quality water tanks than double, triple or four-layered and henceforth the most economical to buy.

Double Layer Plastic Water Tanks:

These water tanks have two layers of plastic. First is the outermost layer and the second layer is the colored layer for visibility or UV stabilized. They are definitely better than single layered tanks but inferior to triple or four layer tanks. These are the most economical layered tank for a healthy use of water. It costs slightly more than a single-layered tank but less than a triple or four layer tanks.

Triple Layer Plastic Water Tanks:

these water tanks have three layers of plastic. One layer serves as the outermost layer, the second layers serve as UV protection and the third layer serves for better visibility. They are better than double layer tanks and are highly durable. They cost more than single and double layer water tanks. They are leak proof and corrosion and rust free.

Four Layer Plastic Water Tanks:

These water tanks have three layers of plastic and one layer of Poly Urethane Foam. Foam layer helps in resisting against extreme warm and cold temperatures outside. They are the best and super quality tanks with the highest strength and longest durability. They are the costliest of all mentioned above but it is worth spending on these tanks because of its superior most quality.

Leave a Reply

Categories
Plastic Water Storage Tank

How to control the growth of algae in your water storage tank?

Blog

How to control the growth of algae in your water storage tank?

How to control the growth of algae in your water storage tank?

Domestic water storage tanks require proper care to keep the water healthy. Water is an essential natural resource and therefore preserving a safe water is a must. Water is life and pure and safe water is a must to lead a healthy life. Direct exposure to sunlight accelerates the growth of algae. In case of overhead water tanks, this is a common problem faced especially during summers as the tank is always exposed to direct sun.

Algae is a bacteria that carry harmful toxins for consumption. In order to prevent it from the growth of algae, there are certain precautions to be taken. To keep the water algae free, follow the simple steps mentioned below:

  • Use an opaque water storage tank. Change the water tank color from white to black. The ultraviolet rays in sunlight damage the plastic of the tank. Therefore black colored tanks are so popular as it absorbs all the harsh UV rays of the sun and does not allow it to enter the tank. the other way is to get the tank painted black inside if you prefer another color outside. But nowadays even other colored water tanks come with UV radiators that protect the same from the harmful ultraviolet rays.
  • Clean the tank properly every three to six months in case of indirect sunlight. In case of direct sunlight, cleaning should be done more often. Drain all water and give a good scrubbing to the tank. Use appropriate supplies to clean the tank and thoroughly rinse before you refill them. Do not forget to filter the tank after it is cleaned as it further helps in removing loose algae.
  • Certain chemicals like chlorine stop algae growth. It is ideal to add 4 parts of chlorine to every 1,000,000 parts of water. The water is safe to drink with this proportion. This ratio is very important and should be followed otherwise the water might become harmful.
  • Bleach kills algae and stops its further growth. Add 1/4 teaspoon of bleach to every gallon of water stored. The ratio again is important here otherwise it may have negative effects on the water.
  • Another simple way is to keep the tank covered with tarpaulin or grass or natural vegetation around the tanks can also be planted such as creepers.

With these simple tips, you can keep the algae at bay and ensure your safety for years to come.

Leave a Reply

Categories
Plastic Water Storage Tank

How To Clean Your Water Tank?

Blog

How To Clean Your Water Tank?

How to Properly Maintain and Clean Your Loft Water Tank?

We all need pure water but somehow forget to pay attention to keep the water tank clean. We use the tank water every day for different purposes but we focus mostly on the cooking water. The other everyday household activities include cleaning, mopping, washing clothes, bathing, brushing etc which we tend to overlook. It is important to ensure that the water stored inside remains bacteria free and clean for all users. Algae and other bacteria grow inside the tank over time which is harmful if the tank is not cleaned regularly. It is recommended to clean the plastic water tank at least once in a year or more often depending upon the use, size or source of water used to fill the tank. There is a proper process to be followed while cleaning the tank which is discussed below in detail:penguin tank_3

  • Keep the place clean where the tank is placed including the top of the tank.
  • The tools used for tank cleaning should be disinfected with antibacterial spray or liquid bleach.
  • Drain the water tank completely with the help of outlet valve.
  • The remaining water can be scooped out using a bucket or a mug.
  • Water can also be sucked up using a vacuum or a clean dry cloth.
  • Make a cleaning solution for cleaning the inside of the tank. A liquid or detergent powder can be used for the same.
  • Scrub the inside of the tank properly. No corner should be left out. Use a bristle brush or a soft sponge, do not use steel brushes or steel sponges as it is too harsh for a plastic tank. They help in removing dirt, fungus, and stains.
  • A power washer can also be used. They come in different sizes and are of different variety. Walls, ceiling, and floor are washed using these. Be careful while using them as they are very powerful and follow all the safety regulations.
  • Use baking soda to clean the dirt from the walls. Add Chlorine bleach to disinfect the water tank completely. Leave the mixture in the tank for some time and make sure no one comes in contact with this solution as it is harmful.
  • Fill the tank with water and make it run to clean the water pipes.
  • Vaccum the tank again and let it dry completely.
  • The tank is clean and ready to be filled with water again.

It is absolutely necessary to follow these points while cleaning the tank properly.

Leave a Reply

Categories
Plastic Water Storage Tank

Why is it beneficial to buy new Plastic Water Storage Tank over repairing an expired one?

Blog

Why is it beneficial to buy new Plastic Water Storage Tank over repairing an expired one?

Why is it beneficial to buy new Plastic Water Storage Tank over repairing an expired one?

Considering the plastic tank, they are broadly used by the Indian consumer for domestic use and for commercial use as well. They are a sort of storage containers used to store water. With greater impact strength and its superior resistance to rust, corrosion and fuel additives, it has proofed to be better than any iron or steel tanks. So, why would it be better to buy a new tank over repairing a broken tank?

Suppose, your tank is broken, may be due to rust or natural calamities or by any external body.

If it is a new tank and it has got light incisions or crack then it can be repaired with a small and cost-effective tool. But if you are trying to fix an old tank than it is hard to assume it to be a good idea. Old tanks might damage over time due to long usage. It may, not only took you several days but also a significant amount investment for repairing the tanks and you definitely won’t want it to repeat the same again and again.

So, points that will bring light to why you should buy a new plastic water storage tank over repairing an old one, are as follows:

  • Time-consuming: Needless to say anything that needs to repair will require time. And if you get to wait several hours for your number to come to use the washroom, due to the scarcity of water, what else to say.
  •  Increases Expenses: If you don’t have enough equipment at home either you have to buy them or get it done by a mechanic. Either way, it involves several expenses.
  •  No guarantee over its repair: Even after spending so much time and money in repairing your tank, it might not give you desired result or it may get damaged over again from the same or different angles and while making a continuous repair, you might actually pay the half amount of a new water tank.

So, the question arises over again, why to spend money on an old thing instead with a little more addition of money you can get a whole new Plastic Water Storage Tank which comes with 5 to 10 years guarantee to give you many worry-less years.

Leave a Reply

Categories
Plastic Water Storage Tank

Does The Water Remain Safe In plastic water storage tank?

Blog

Does The Water Remain Safe In plastic water storage tank?

Does The Water Remain Safe In plastic water storage tank?

The water, like any other fluid, does not have any particular shape and it takes the shape of the container. But during the same, it also acquires several other qualities of the plastic container as well. The same holds true for water as well. The safety of stored water in a plastic water storage tank is a matter of discussion.

Though the quality of water stored in a steel water tank is also a matter of debate. The corrosion of the internal layer can contaminate the water as well.

If the water is being supplied by the municipality, it is often safe to assume that the quality. So, if it is being treated or filtered before supplying, it is well and good. If it is not, for example in case of rainwater harvesting, very little can be done to purify it inside the tank.

It is important to understand that a water storage tank is not a water purifier. It cannot purify and make water portable. The best water storage tank can do is to ensure that it does not facilitate the algae formation and germ buildup.

The use of poor quality plastic may influence the chemical composition of water up to a large extent. It might even go unnoticed for a short period of time, but after a time being, it will start to project a peculiar ‘plastic’ taste in the stored water. Which is why it is recommended to go for a tank that has been made with food grade material.

Also, the shape of the tank plays a vital role in the same. The round cross-section of a cylindrical tank ensures that the water receives maximum circulation, upon opening of any of the water channel or tap. This facilitates the water circulation and thereby prohibits the growth of algae or any other pathogen inside.

Special features like ultraviolet guard is an additional per, that goes a step further than usual and ensure that the water does not get affected due to the long hours of exposure to the ultraviolet component of the sunlight.

The plastic water storage tanks offered by the house of penguin are made up of food grade material, which ensures the purity of water. Also, it is manufactured with multiple layers, each with a distinct advantage to ensure the good quality of water stored. The roto-molding manufacturing process ensures a uniform cross section and even thickness of each layer. It is a quality product designed, manufactured and offered to enable you to have aces to clean, fresh healthy water every hour of the day.

Leave a Reply

Categories
Plastic Water Storage Tank

Review 2 Layer Water Tank

Blog

Review 2 Layer Water Tank

Review 2 Layer Water Tank

Despite the attempts to smoothen down the gap of socio-economical strata in India, a huge population of India belongs to the lower middle class. For their personal use they need to get a water tank for their family but within a limited budget. Several water tank manufacturers in West Bengal provides plastic water storage tank for such people.However, while trying to extract profit out of it, they deliver poor quality water tanks to them, which looks in shape at the point of sale, but afterward, it degrades pretty quickly and ultimately causes harm to the users. To address this issue, the house of Penguin tank has, water tank manufacturer in West Bengal a basic plastic water tank out of the best quality material, namely the 2 layer water tank.

Obviously one can find water storage tanks with much better features as well, but today, we are focusing on the best quality basic water storage tank made out of plastic. The two-layer tank, as the name clearly indicates, contains two layers overlapping in the cross-section.

The inner layer is made up of plastic of food grade standard. As the water stays in contact with the innermost layer of any tank, the superior quality of plastic makes the water free of any harmful chemical or pathogen. The outer layer is made up of the ultraviolet blocking material, and as the name suggests, it blocks the harmful effects of ultraviolet rays to penetrate and influence the properties of the stored water.

The tank is made through the roto-molding process, which ensures a newly uniform cross-section of every layer and also the continuity of both layers in the tank.

Even with a limited budget, Indians and few options to make the best out of their money, which is absolutely true for Penguin tank as one can get multiple options for the model in both color and size. One can pick from traditional black, parrot green and Sudan blue as the color of their water tank.
Also, one can pick the tank from a set of various capacity. It depends on one’s usage, availability of water and the number of habitats sharing the same.

The house of Penguin tank offers a wide range of products and the two-layered tank is simply the basic model. One can check out the Maxx foam tank, or four layer water tanks as well. Each of the tanks has its own features, making it ideal for domestic and commercial use.

Leave a Reply

Categories
water tank in India

The History of Water Storage Tanks

Blog

The History of Water Storage Tanks

The History of Water Storage Tanks

No matter how much science and technology evolve with time, the dependency of humans on water is never likely to change. The same was true in the reverse end of the time line as well. Today, we store water mostly in the plastic water storage tanks, of various materials or choice and availability, predominantly the plastic water storage tanks. In future, the materials like to evolve a lot, for further convenience of humans, without a doubt.

A water storage tank is a large container that collects and stores a rather large quantity of water for a various everyday purpose, from drinking, bathing, to irrigation and doing other chores.

The need of storing water was raised by the early civilization as well. In many of the archiological sites, we come across the presence of man-made water storage bodies, such as step well, and cistern. The evidence of the existence of the water storage tanks goes back to as early as Indus valley civilization.it dates back to around 3000 to 1500 BC.

Though few of them were naturally occurring structure, discovered and later used by the ancient civilization, they adopted the idea and later designed and made some on their own as well, mostly out of granules, wood, and stones. Though there remained a big issue of the quality of the water as it was often got contaminated with algae animal waste and dirt etc.

Later its utility spread throughout the world and several civilizations began to adopt the same. Particularly the castles, and monasteries began building and using these. Several medieval civilizations modified and created the design and produced cisterns instead. Unlike the step wells and open water tanks, the cisterns were designed in the underground. Thereby the level of contamination was somewhat lesser than the previous ones.

Gradually, people started building smaller sized water tanks for family or separate socialites. Also, the material used for it changed as well. Nowadays, there are several types of materials used for the same. Each having its own set of advantages and disadvantages, but the use of plastic water storage tanks are the most prevalent ones.

Several other advancements also came in the modern times. Underground tanks were manufactured, and so was the traditional overhead tanks. Due to lack of owning personal space, most people prefer the overhead tank over its counterpart.

The history of water tank was long and evolutionary, and certainly, the story will keep going on in the future as well.

Leave a Reply

Categories
Plastic Water Tank in India

Steel vs. Plastic Water Tanks- Which One Is Better?

Blog

Steel vs. Plastic Water Tanks- Which One Is Better?

Steel vs. Plastic Water Tanks- Which One Is Better?

Let it be any commodity around us, having several options often creates confusion regarding the one to actually get. The same is true for water storage tanks as well. Let it be the type of material, installation area or many more aspect, tanks come is many options. The debate over the material, metal or plastic is a very common topic. However, the rising number of sales and purchase of the plastic water tank in India shows quite clearly the winning side.

Hereby, we present some of the factors which make the plastic water tanks a better option-

Price and affordability-

Probably the most important factor is the affordability. The plastic water tanks are the much cheaper when compared to any standard metal tank. The metal tanks are usually made up of galvanized steel along with a coating of zinc for stability. The price difference is almost 35 percent in favor of a standard plastic water tank in India but the price slightly modifies as per the brand, type size, color etc.

Ease of installation-

Every family and business need a water tank, but not everyone is a body builder or could effort quality manpower at will. Also relocating with steel tank is a Herculean task. Moreover, a metal tank needs a much strong and concrete base for its stability. Thus installing a plastic water tank comes with more ease in every of the above-mentioned aspects.

Ease of maintenance-

Buying a water tank is a one-time event, while their maintenance might not be, depending upon each choice. Plastic water tanks are often self-cleaning and require maintenance occasionally due to more water circulation, airtight lid, and usage of superior quality material. While, for a metal water tank, with joints and issue of corrosion, and quality of water, it could become a routine thing.

The factor of longevity-

As long as a plastic water tank is coated with an ultra violet layer, to protect them against long sun exposure, it is most likely to outlast its count part made up of metal. The issue of rusting and corrosion, are the main factors that challenge the shelf life of the metal tanks. Since, buying them every year is not an accepting scenario, making the plastic tank a better option.

These are the major factors in favor of the plastic water tanks over the metal counterpart.

Leave a Reply

Categories
water tank in India

PRODUCT REVIEW 4 LAYER WATER TANK

Blog

PRODUCT REVIEW 4 LAYER WATER TANK

PRODUCT REVIEW 4 LAYER WATER TANK

The water tanks play an important role in the overall establishment of a civilization, both in the place of residence and business. Several water tanks manufacturers are there in India, and the Penguin Tank is obese of the leading brand name in the domain. l product in this product length is the 4 layer foam tank. Let’s understand in brief its features and specification

  1.  As the name itself reveals, the tank has 4 layers, one over the previous one. The innermost layer is made up of the food grade polymers, which ensures the water is never in contact with the polymer that can degrade the health of the individual.
  2. The next consecutive layer is the insulating foam layer which creates a vacuum like structure between the stored water inside and the outside environment, mostly the temperature. Thus, it does not let the water temperature change according to the weather.
  3.  The black middle layer, it reinforces the insulation of stored water even more.  It is made up of poly urethane. That insulation is effective enough to keep the water cold of room temperature even if the outside temperate falls in the range of 45 to 50-degree centigrade.
  4. The outermost layer is for the ultra violet protection. As the ultra violet spectrum of light is harmful to health, this layer of the tank ensures that it does not influence the water that is being stored inside. it is a competitive advantage provided by this particular water tank manufacturer in West Bengal over the others dealing with the same.
  5. All these layers are made up with the help of roto-molding technology. This particular manufacturing process makes the cylindrical tank with uniform cross section and uniform layering. So, under no circumstances, any portion of the tank is likely to miss out any of the underlying layers. every cross section will unveil the same consistency.
  6. As we live in a consumer driven market, the 4 layer foam tank is available in several color options as well. These include the white, parrot green, golden yellow, Sudan blue, violet, and lemon green.

The popularity of this particular model is uplifting these days significantly. Primarily because of the immense benefits it offers to the users. Thus the four layer water tank is an ideal choice for the people looking for a reliable water tank for domestic or commercial use.

Leave a Reply