Penguin Tank

Categories
Plastic Water Storage Tank

How To Clean Your Water Tank?

Blog

How To Clean Your Water Tank?

How to Properly Maintain and Clean Your Loft Water Tank?

We all need pure water but somehow forget to pay attention to keep the water tank clean. We use the tank water every day for different purposes but we focus mostly on the cooking water. The other everyday household activities include cleaning, mopping, washing clothes, bathing, brushing etc which we tend to overlook. It is important to ensure that the water stored inside remains bacteria free and clean for all users. Algae and other bacteria grow inside the tank over time which is harmful if the tank is not cleaned regularly. It is recommended to clean the plastic water tank at least once in a year or more often depending upon the use, size or source of water used to fill the tank. There is a proper process to be followed while cleaning the tank which is discussed below in detail:penguin tank_3

  • Keep the place clean where the tank is placed including the top of the tank.
  • The tools used for tank cleaning should be disinfected with antibacterial spray or liquid bleach.
  • Drain the water tank completely with the help of outlet valve.
  • The remaining water can be scooped out using a bucket or a mug.
  • Water can also be sucked up using a vacuum or a clean dry cloth.
  • Make a cleaning solution for cleaning the inside of the tank. A liquid or detergent powder can be used for the same.
  • Scrub the inside of the tank properly. No corner should be left out. Use a bristle brush or a soft sponge, do not use steel brushes or steel sponges as it is too harsh for a plastic tank. They help in removing dirt, fungus, and stains.
  • A power washer can also be used. They come in different sizes and are of different variety. Walls, ceiling, and floor are washed using these. Be careful while using them as they are very powerful and follow all the safety regulations.
  • Use baking soda to clean the dirt from the walls. Add Chlorine bleach to disinfect the water tank completely. Leave the mixture in the tank for some time and make sure no one comes in contact with this solution as it is harmful.
  • Fill the tank with water and make it run to clean the water pipes.
  • Vaccum the tank again and let it dry completely.
  • The tank is clean and ready to be filled with water again.

It is absolutely necessary to follow these points while cleaning the tank properly.

Leave a Reply

Categories
Plastic Water Tank in India

Rotational Moulding- Advanced Manufacturing Process

Blog

Rotational Moulding- Advanced Manufacturing Process

How to Properly Maintain and Clean Your Loft Water Tank?

Rotomoulding process is the most advanced technology in the field of manufacturing water tanks. Penguin tank, one of the largest manufacturer of rotomolding water tanks in India follow this process. Plastic water tanks have already gained popularity over the steel. Rotational molding popularly known as rotomolding or rotocasting is a process of manufacturing a hollow one-piece plastic item.

There are many advantages of rotational molding over the assembled ones. Some of them are mentioned below:

  • A variety of complex designs and different shapes can be made with uniform wall thickness.
  • The process fits into any size from tiny to large. There is a good scope of flexibility as it can make many sizes for different uses.
  • The process is cost-effective and economical than others. Each mold cost less than other molding methods
  • Colour matching is easier and at a lower cost. Some popular colors are marble and sandstone.
  • The process involves limited material waste and it follows a systematic process.
  • It is a batch production process and therefore faster and more than one tank is produced at a time. Generally, 3 to
  • 4 tanks can be produced at a time.
  • Multiple layers can be manufactured under this process.
  • The process of quick tooling is followed.
  • It offers high-quality surface finishing with gloss. Thus it reflects the following characteristics
  • The decorative in-mold techniques and graphic designs are by-products of this technique.
  • The parts manufactured are stress-free and offer durability and strength.
  • The production process is flexible and any kind of alteration is possible during the same.

With so many advantages and no disadvantage at all, this process is definitely easier, cost-effective and versatile. Assembling is an outdated, time consuming and costlier process.

Undoubtedly, rotomolding water tanks have gained popularity in recent times. The house of Penguin Tank is offering a wide variety of rotomolding water tanks and should not be missed. It is long lasting as already mentioned above and the life expectancy is not less than 20 years.

This process is highly recommended and we are sure that in near future rotomolding will rule over the entire plastic manufacturing industry, particularly for partial or total hollow objects. Customers are switching over to this process than assembled ones as it saves money and time. After all, consumer satisfaction is the key factor for all manufacturers in expanding business and ultimately earning more profit.

Leave a Reply

Categories
Plastic Water Storage Tank

UV Stabilisers- Pillar of Plastic Water Tanks

Blog

UV Stabilisers- Pillar of Plastic Water Tanks

UV Stabilisers- Pillar of Plastic Water Tanks

Steel Or Plastic Water Storage Tanks? This is a commonly asked question and both have its own advantages and disadvantages. A buyer’s main concern is strength and longevity. Although steel is supposed to be heavier than poly water tanks it cannot withstand corrosion and should be kept away from salty sea water or chlorine. On the other hand, plastic water storage tanks are non- corrosive and require less maintenance.

Plastics usually age with continuous exposure to heat, light, and oxygen. UV stabilizers in plastics prevent them from becoming brittle and decomposing. The chemicals used are similar to those used in sunscreen products which protect the skin from the harmful UV rays. It protects them from loss of strength, flexibility, and stiffness. The main issue with steel one is the maintenance and an inner poly lining is recommended to protect against corrosion.

Plastic water storage tanks are comparatively easier to install and less expensive to transport as it is lighter than the steel tanks. Less labor is needed to install the former. Poly tanks can be set up with a tank self-cleaning system while stainless steel requires a lot of care and expensive maintenance.

Poly tanks come in different shapes, styles and a variety of colors due to its flexibility than many galvanized steel tanks. At the same time, high quality rotational molded poly tanks have a similar life expectancy warranty of about 25 to 30 years. At the same time, plastic water tanks are approximately 35% cheaper than the steel tanks.

Water quality is pure in case of poly water tanks as it manufactured from food grade polyethylene just like Tupperware products. In order to improve the quality in case of steel ones, an inner poly lining is required which helps to protect against inner corrosion.

In order to sum up, the above-mentioned comparison concludes to the popularity and longevity of poly tanks over the steel ones. Therefore, a UV-stabilised poly tank definitely wins over the latter. The harmful UV rays of the sun affect the plastic objects. Over time, they begin to break down, become brittle and crack. The color fades away. At the same time, metals rust and corrode. Chromium can be added to strengthen steel but all material has a finite life. It will still rust and corrode. With poly tankers that are UV stabilized, you can rest assured that it will last a long time and not less than 20 years.

Leave a Reply

Categories
Plastic Water Storage Tank

Understanding The Usefulness of A Triple-layer Foam Tank

Blog

Understanding The Usefulness of A Triple-layer Foam Tank

Understanding The Usefulness of A Triple-layer Foam Tank

Having a water storage tank is quite essential for every personal and commercial space. To meet this requirement, many water tank manufactured in India offer their respective products. However, not all of them are made with proper technical expertise. This is what makes Penguin Tank.

The house of Penguin tank, being a leading water tank manufacturer in India, offer a wide range of products.
The three-layer foam or Triple Layer Foam Tank water tank is rather a special product amo9g the same. We will discuss, its outstanding features in brief today.

  •  The Food Grade Layer

    The innermost layer is made up of food grade material, which is made up of superior quality polymer.. it ensures that the water stored inside, does not acquire any property of the polymer, which is common concerning factor among poor grade plastic water tank. In a nutshell, it ensures the water stored inside stays uncontaminated, clear and fresh, making it suitable for daily use including drinking.|

  •  The Foam Layer

    The next consecutive layer comprises of insulating materials. It is mainly the foam, which creates a hindrance for transmission of heat from the outside to the stored water inside the tank. It ensures the water stored inside, remains unaffected of the harsh climate outside, this holds true for both harsh hat climate, and cold climate.

  •  The Ultraviolet Layer

    The outermost layer is made with specific material to block the ultraviolet component of the sunlight. It does not let the outside atmosphere or unwanted characteristics to influence the water stored inside.

All of these layers are processed through the roto-molding technology. This manufacturing process is ideal for making total or partial hollow structures. Its manufacturing principles ensure the cylindrical tanks have the uniform cross-section, with uniform material content. The three-layer water tank also comes in several color options. These include Sudan blue, parrot green, golden yellow, violet, lemon green and black.

Thus, the multi-layered tanks are gradually taking over the place for traditional single-layered tanks. The usefulness and effectivity of the tank make it an ideal choice for both domestic and commercial purpose. Needless to say, this particular product from the house of Penguin tank, is in demand these days. Predominantly, the property of blocking the heat from the surrounding into the water makes it a stand-alone product amongst others produced by water tank manufactures in India.

Leave a Reply

Categories
Plastic Water Storage Tank

How Is The Multi-layer Water Tank Able To Save Electricity?

Blog

How Is The Multi-layer Water Tank Able To Save Electricity?

How Is The Multi-layer Water Tank Able To Save Electricity?

The need for a water reservoir has been a part of human civilization for ages. With time the mode of the story evolved. And in the current scenario, the plastic water storage tanks are the most prevalent storage means.

However, there are several problems associated with the same. Most of the plastic water storage tanks are made of the single layer. Though it may seem to be sufficient, it results in unwanted properties of the water, predominantly its temperature. Let’s understand, how it happens

Usually, the water in the storage tank stores water fills until it is up to the brim of the tank. There it stays still until any of the water taps are accessed from within the house. The standing water gets exposure to sunlight for quite some time. As a result, the temperature begins to heat up gradually. This problem is more prevent in dry, and hot weather, whereby the mid-day the water is as good as boiled water.

Thus, people are either forced to wrap up all their tasks during morning itself (which is often not possible) or use a water cooler to bring the water to a tolerable temperature. This causes the huge cost of electricity.

Vice versa, in the cold stations, the water standing still in the water tank, experience a sharp decrease in the temperature. During hail stores, it can cause freezing of water in the pipes and tanks. As a result of a pressure difference. It may cause bursting of the pipeline, leading to personal injury and damage to property.this installing a water heater becomes crucial, which consumes a rather high amount of electricity.

How Do Penguin Tanks Help In This Regard?

By keeping the aforementioned issue in mind, we, at the house of Penguin Tank manufacture a wide range of products. Most of these are multiple layers. The extra layer acts as an insulator and keeps the water at an optimal temperature. Further, the anti-ultraviolet layer ensures the heat component of the sunrays interferes less in the composition of water.

The plastic water storage tanks, mitigate the need of installing any water cooler or heater. Thus, it saves a lot of money spending on the electricity. Moreover, the multiple layers make it an opaque system, which also ensures the algal growth inside the water does not take place, under normal environmental conditions.

Leave a Reply

Categories
Plastic Water Storage Tank

Why is it beneficial to buy new Plastic Water Storage Tank over repairing an expired one?

Blog

Why is it beneficial to buy new Plastic Water Storage Tank over repairing an expired one?

Why is it beneficial to buy new Plastic Water Storage Tank over repairing an expired one?

Considering the plastic tank, they are broadly used by the Indian consumer for domestic use and for commercial use as well. They are a sort of storage containers used to store water. With greater impact strength and its superior resistance to rust, corrosion and fuel additives, it has proofed to be better than any iron or steel tanks. So, why would it be better to buy a new tank over repairing a broken tank?

Suppose, your tank is broken, may be due to rust or natural calamities or by any external body.

If it is a new tank and it has got light incisions or crack then it can be repaired with a small and cost-effective tool. But if you are trying to fix an old tank than it is hard to assume it to be a good idea. Old tanks might damage over time due to long usage. It may, not only took you several days but also a significant amount investment for repairing the tanks and you definitely won’t want it to repeat the same again and again.

So, points that will bring light to why you should buy a new plastic water storage tank over repairing an old one, are as follows:

  • Time-consuming: Needless to say anything that needs to repair will require time. And if you get to wait several hours for your number to come to use the washroom, due to the scarcity of water, what else to say.
  •  Increases Expenses: If you don’t have enough equipment at home either you have to buy them or get it done by a mechanic. Either way, it involves several expenses.
  •  No guarantee over its repair: Even after spending so much time and money in repairing your tank, it might not give you desired result or it may get damaged over again from the same or different angles and while making a continuous repair, you might actually pay the half amount of a new water tank.

So, the question arises over again, why to spend money on an old thing instead with a little more addition of money you can get a whole new Plastic Water Storage Tank which comes with 5 to 10 years guarantee to give you many worry-less years.

Leave a Reply

Categories
Plastic Water Storage Tank

The Process Of Roto-molding Water Tanks In Detail

Blog

The Process Of Roto-molding Water Tanks In Detail

The Process Of Roto-molding Water Tanks In Detail

The manufacturing process of water tanks determines several factors about the longevity and state of water stored inside. The roto molding technique is a superior molding technology that makes seamless products in a mass production at a comparatively low price.

Traditionally, other molding techniques were traditionally used by most of the manufacturers, though nowadays, few leading water tank manufacturers in India are employing the roto-molding technique for producing plastic water storage tanks. We will discuss the roto-molding technique in details now.

A roto molding water tank offers a wide range of benefits over the conventional ones. The roto-molding is a highly versatile and the best possible manufacturing technique to produce partially or totally hollow structures.

Let’s understand in details, how the roto-molding technique is carried out in detail –

  •  The resin of powder polymer is measured as per the desired thickness and poured into the mold
  •  The apparatus is then subjected to heat in order to melt the contents
  • Simultaneously is rotated in either one two, or all three axes, depending upon the particular requirement
  • The molten polymer is then evenly spread on the inner surface of the mold. The centrifugal force generated through the rotational momentum, ensure that the thin paper stays and sticks on the inner surface itself.
  •  The mold is cooled with fans and the polymer inside is solidifies in a hollow cylindrical structure.
  •  On complete solidification, the mold is opened and the tank is extracted.

Various colored tanks are processed by using the colored polymer as the raw material. Thus, the tanks never lose the color and stay newer for a longer period of time. The feature of the threads on the topmost portion for the threaded lids is also added through the presence of threads on the mold itself.

The roto molding technique is exceptionally helpful to make multi-layered tanks. After the outermost layer is molded and solidifies, each of the immediate inner layers is added from inside.

A roto molding water tank is manufactured in one piece, with smooth edges and curves. The absence of any sharp joint, or bend ensures that the resultant product has more longevity and shelf life.

All but one (the loft tank) models of water tanks of Penguin tank are manufactured with the roto-molding process. It is superior to other water tanks in the market, which are either assembled or manufactured by traditional molding technology.

Leave a Reply

Categories
Plastic Water Storage Tank

Does The Water Remain Safe In plastic water storage tank?

Blog

Does The Water Remain Safe In plastic water storage tank?

Does The Water Remain Safe In plastic water storage tank?

The water, like any other fluid, does not have any particular shape and it takes the shape of the container. But during the same, it also acquires several other qualities of the plastic container as well. The same holds true for water as well. The safety of stored water in a plastic water storage tank is a matter of discussion.

Though the quality of water stored in a steel water tank is also a matter of debate. The corrosion of the internal layer can contaminate the water as well.

If the water is being supplied by the municipality, it is often safe to assume that the quality. So, if it is being treated or filtered before supplying, it is well and good. If it is not, for example in case of rainwater harvesting, very little can be done to purify it inside the tank.

It is important to understand that a water storage tank is not a water purifier. It cannot purify and make water portable. The best water storage tank can do is to ensure that it does not facilitate the algae formation and germ buildup.

The use of poor quality plastic may influence the chemical composition of water up to a large extent. It might even go unnoticed for a short period of time, but after a time being, it will start to project a peculiar ‘plastic’ taste in the stored water. Which is why it is recommended to go for a tank that has been made with food grade material.

Also, the shape of the tank plays a vital role in the same. The round cross-section of a cylindrical tank ensures that the water receives maximum circulation, upon opening of any of the water channel or tap. This facilitates the water circulation and thereby prohibits the growth of algae or any other pathogen inside.

Special features like ultraviolet guard is an additional per, that goes a step further than usual and ensure that the water does not get affected due to the long hours of exposure to the ultraviolet component of the sunlight.

The plastic water storage tanks offered by the house of penguin are made up of food grade material, which ensures the purity of water. Also, it is manufactured with multiple layers, each with a distinct advantage to ensure the good quality of water stored. The roto-molding manufacturing process ensures a uniform cross section and even thickness of each layer. It is a quality product designed, manufactured and offered to enable you to have aces to clean, fresh healthy water every hour of the day.

Leave a Reply

Categories
Plastic Water Storage Tank

Review 2 Layer Water Tank

Blog

Review 2 Layer Water Tank

Review 2 Layer Water Tank

Despite the attempts to smoothen down the gap of socio-economical strata in India, a huge population of India belongs to the lower middle class. For their personal use they need to get a water tank for their family but within a limited budget. Several water tank manufacturers in West Bengal provides plastic water storage tank for such people.However, while trying to extract profit out of it, they deliver poor quality water tanks to them, which looks in shape at the point of sale, but afterward, it degrades pretty quickly and ultimately causes harm to the users. To address this issue, the house of Penguin tank has, water tank manufacturer in West Bengal a basic plastic water tank out of the best quality material, namely the 2 layer water tank.

Obviously one can find water storage tanks with much better features as well, but today, we are focusing on the best quality basic water storage tank made out of plastic. The two-layer tank, as the name clearly indicates, contains two layers overlapping in the cross-section.

The inner layer is made up of plastic of food grade standard. As the water stays in contact with the innermost layer of any tank, the superior quality of plastic makes the water free of any harmful chemical or pathogen. The outer layer is made up of the ultraviolet blocking material, and as the name suggests, it blocks the harmful effects of ultraviolet rays to penetrate and influence the properties of the stored water.

The tank is made through the roto-molding process, which ensures a newly uniform cross-section of every layer and also the continuity of both layers in the tank.

Even with a limited budget, Indians and few options to make the best out of their money, which is absolutely true for Penguin tank as one can get multiple options for the model in both color and size. One can pick from traditional black, parrot green and Sudan blue as the color of their water tank.
Also, one can pick the tank from a set of various capacity. It depends on one’s usage, availability of water and the number of habitats sharing the same.

The house of Penguin tank offers a wide range of products and the two-layered tank is simply the basic model. One can check out the Maxx foam tank, or four layer water tanks as well. Each of the tanks has its own features, making it ideal for domestic and commercial use.

Leave a Reply

Categories
water tank in India

The History of Water Storage Tanks

Blog

The History of Water Storage Tanks

The History of Water Storage Tanks

No matter how much science and technology evolve with time, the dependency of humans on water is never likely to change. The same was true in the reverse end of the time line as well. Today, we store water mostly in the plastic water storage tanks, of various materials or choice and availability, predominantly the plastic water storage tanks. In future, the materials like to evolve a lot, for further convenience of humans, without a doubt.

A water storage tank is a large container that collects and stores a rather large quantity of water for a various everyday purpose, from drinking, bathing, to irrigation and doing other chores.

The need of storing water was raised by the early civilization as well. In many of the archiological sites, we come across the presence of man-made water storage bodies, such as step well, and cistern. The evidence of the existence of the water storage tanks goes back to as early as Indus valley civilization.it dates back to around 3000 to 1500 BC.

Though few of them were naturally occurring structure, discovered and later used by the ancient civilization, they adopted the idea and later designed and made some on their own as well, mostly out of granules, wood, and stones. Though there remained a big issue of the quality of the water as it was often got contaminated with algae animal waste and dirt etc.

Later its utility spread throughout the world and several civilizations began to adopt the same. Particularly the castles, and monasteries began building and using these. Several medieval civilizations modified and created the design and produced cisterns instead. Unlike the step wells and open water tanks, the cisterns were designed in the underground. Thereby the level of contamination was somewhat lesser than the previous ones.

Gradually, people started building smaller sized water tanks for family or separate socialites. Also, the material used for it changed as well. Nowadays, there are several types of materials used for the same. Each having its own set of advantages and disadvantages, but the use of plastic water storage tanks are the most prevalent ones.

Several other advancements also came in the modern times. Underground tanks were manufactured, and so was the traditional overhead tanks. Due to lack of owning personal space, most people prefer the overhead tank over its counterpart.

The history of water tank was long and evolutionary, and certainly, the story will keep going on in the future as well.

Leave a Reply