It becomes very difficult to get a plumber when you need them the most. Now, imagine there is a crack on the body of your tank and you need a plumber urgently. In such cases, repairing your plastic water storage tank by yourself will be the best option. Not only it will save you time, but it will also be cost-effective if you can do it by yourself. So, here are the following guidelines that can help you repair your domestic water storage tank on your own. Firstly, you need to know the basic equipment that is required for the purpose and secondly, you should also know the proper instructions that are needed to carry out the work in the perfect way.

Plastic water tank leakage solution:

Plastic water storage tanks can last for a longer period of time compared to other types of tanks. Also, it is much easy to repair a plastic water storage tank. Depending on what the plastic tanks hold, sometimes you might need to call a plumber to do the repair work. Domestic or a commercial water storage tank plays a very vital role in the daily life of your household and business use. Before you start the repair work, you must know your abilities and limitations. If you face any doubt, it is suggested to seek help from professional plumbers or from water tank manufacturers in West Bengal from whom you have bought the tank. You need to empty your plastic water storage tank before you start with the repair work. However, if you are working with a septic tank or a tank containing hazardous substances, it is always suggested to take expert advice. You should always start the repair work as early as possible. Don’t ignore it because doing so will grow the crack to a point where it won’t be repairable anymore.

How to repair your plastic water storage tank:

Prepare the tank

Before you begin with the work, make sure both the outside and inside of your plastic water storage tank are clean. Ensure that the area of the leakage is free from any kind of dirt or extraneous material. Use a rag to clean if there are dust particles.

Drill two small holes

One at the top and another one at the bottom of the crack. These holes will help to reduce the structural pressure and it will stop the crack from growing larger in course of time. Now, with the aid of your rotary tool, sand a groove ½ inch parallel to the crack. This will allow your welding rod a place to fit in and to seal the crack that has occurred.

Follow the directions that are required while you are applying plastic tank repair epoxy. Sometimes it is used to cover small cracks. Sometimes the tank should be at a prescribed temperature while applying the epoxy.

Once you are done with the epoxy, now take the polyethylene welding rod and cut it to a point with your utility knife. Take the plastic welding gun and insert the welding rod into it. Now touch the epoxy to the top of the crack. Give some pressure as per the instruction and pull the gun down or move it across to the other end of the crack.

Once you are done, make sure to dry the epoxy for at least 1 hour. Once it has been dried up, sand it down gently to remove the rough outer edges and paint it with the color that matches the color of your plastic water storage tank.

With the help of the following guidelines, you can repair the leakage area of your plastic water storage tank. However, it is always suggested not to take any risk for tanks containing hazardous substances. Seek help from water tank manufacturers in India whenever it is required.